Cone crusher is a common machine and equipment for crushing iron ore. The body type of cone crusher is relatively large, and the whole process of crushing iron ore will also lead to the condition of equipment damage, in which the cone crusher suddenly stops while crushing iron ore. What is the cause of this condition, and what harm will it do to the equipment, Jiangsu Qidong Zhuoya Mining Equipment is here to talk to everyone.

Encountered during manufacturing Cycloidal hydraulic motor with brake In case of sudden shutdown, Zoya reminded everyone to find out the reason for the sudden shutdown of the cone crusher first. Here are some common reasons for this kind of situation. First, the common cone crusher blanking port is blocked. In the production process, excessive or uneven feeding by the feeding staff will lead to blanking port blocking. At this time, the excessive production load of the cone crusher will lead to the rupture of the fuse wire, leading to shutdown.

The sudden shutdown of the cone crusher may also be caused by the low working voltage. The unstable or low working voltage will lead to the shutdown. Therefore, check whether the working voltage is normal. In addition, it may also be a camshaft problem. If the fixed fixed shaft sleeve of the camshaft is loose or burst, there will be no gap between the bearing with seat and the sound card frame, which will lead to the inability of the camshaft to operate, and then the cone crusher will suddenly stop. There is also insufficient tightness of the belt. If the belt is too loose, the belt will deflect, and it will not be able to give sufficient driving force, resulting in a shutdown condition. This kind of situation can also occur when the rolling bearing is burnt out, which will make all cone crushers unable to work normally.

With brake Cycloid hydraulic motor We can handle it in the following ways: Before starting the cone crusher, pay attention to check whether there is any residue at the blanking port of the cone crusher, and if there is, clean it immediately. The second is whether the belt tightness of the cone crusher is suitable. Effectively adjust the belt tightness to resolutely avoid being too tight or too loose. In addition, pay attention to the working voltage of the cone crusher to maintain the reliability and continuity of the working voltage. Also, pay attention to daily maintenance. Due to its necessity, the rolling bearing should pay special attention to its damage and immediately deal with the abnormal operation status.