To reduce walking in the application of hydraulic transmission system Reducer The pressure energy loss when using the rotary drum line motor needs to be slow from the inside to reduce the power loss in addition to reducing the pressure loss inside the system. To solve this problem, we can improve the pressure loss of the internal overcurrent channel of the electronic device, adopt the integrated control circuit and calcine the flow channel. In addition, it is also necessary to reduce or eliminate the loss of one-way throttle valve of the system, try to reduce the overflow flow of non safety factor, and avoid using one-way throttle valve system to regulate flow and pressure.

In the use of raw materials, we can use the raw materials and new rubber products produced and processed under negative pressure, which can effectively reduce the friction loss. The special rotary drum line motor for hydraulic drawworks must be repaired and maintained during operation. The hydraulic motor must be repaired and maintained immediately to prevent air pollution from harming the service life and reliability of the motor. New pollution monitoring methods should be developed as far as possible. The automatic measurement and control system for air pollution should be adjusted immediately and not be outdated, Prevent losses caused by untimely handling. In order to reduce pressure energy loss of hydraulic motor, manufacturers and consumers must work together to prevent pressure energy loss at a very large level. How to reduce the loss of hydraulic motor in the whole process of application

Of course Cycloidal hydraulic motor of snow sweeper The removal of is also important. The hydraulic motor must generally be cleaned before it is announced to be put into use. The purpose of cleaning is to remove environmental polluting chemicals, metal composite chips, synthetic fiber compounds, transformer cores, etc. that remain in the motor. In the first two hours of work, even if the motor is not completely damaged, it will also lead to a series of common problems. Therefore, the main oil passage of the motor should be cleared as follows:

1. The car oil tank is cleaned with an easy drying organic cleaning solution, and then the organic solution residue is cleaned with filtered vapor.

2. Clear Low speed high torque hydraulic motor For all pipelines, in some cases, prepreg the pipeline and connector.

3. Use an oil filter on the pipeline to maintain the oil pipeline and pressure pipeline provided by the maintenance valve.

4. Put a cleaning plate on the collector to replace precision machining valves, such as electro-hydraulic servo valves.

5. Check whether the specifications and models of all pipelines are appropriate and whether the connections are appropriate.