I Which one is good for cycloidal hydraulic motor Application of:
1. It is an actuating element of the hydraulic system, which converts the hydraulic pressure energy provided by the hydraulic pump into the mechanical energy (torque and speed) of its output shaft.
2. The hydraulic motor is also called Oil motor It is mainly used in injection molding machinery, ships, hoists, engineering machinery, construction machinery, coal mining machinery, mining machinery, metallurgical machinery, ship machinery, petrochemical industry, port machinery, etc.
II Advantages of cycloidal motor Features of:
1. From the point of view of energy conversion, hydraulic pump and hydraulic motor are reversible hydraulic components, and the working fluid input to any hydraulic pump can make it become the working condition of hydraulic motor.
2. On the contrary, when the main shaft of the hydraulic motor rotates driven by the external torque, the working condition of the hydraulic pump can also be changed.
3. Because they have the same basic structural elements - sealed and periodically changeable volume and corresponding oil distribution mechanism.
4. However, due to Cycloidal motor of aerial work vehicle Different from the working conditions of hydraulic pumps, their performance requirements are also different, so there are still many differences between hydraulic motors and hydraulic pumps of the same type.
5. Firstly, the hydraulic motor should be able to rotate forward and backward, so its internal structure should be symmetrical.
6. The speed range needs to be large enough, especially for its low stable speed.
7. Therefore, it usually adopts rolling bearing or hydrostatic sliding bearing.
8. Secondly, because the hydraulic motor works under the condition of input pressure oil, it does not have the ability of self-priming, but it needs some initial sealing to provide the necessary starting torque.
9. Because of these differences, the hydraulic motor and hydraulic pump are similar in structure, but they cannot work reversibly.
