Network optimization information:

General precautions for setting and adjusting new hydraulic equipment are as follows

（1） During installation and assembly, first of all, strictly clean the hydraulic components and auxiliary components installed in the main body to remove rust inhibitor and all dirt harmful to the working fluid. Special for snow sweeper Cycloid hydraulic motor All blockages, plastic blockages and piping blockages of hydraulic parts and oil ports of piping shall be removed gradually with the progress of the project. Do not remove them first to prevent dirt from entering the parts from the oil ports.

（2） The internal and external surfaces of the tank, the mating surfaces of the host and other visible components must be kept clean.

(3) Protect exposed parts (piston rod, etc.) of components in contact with working fluid to prevent dirt from entering.

(4) The tank cap, nozzle and air filter must be fully sealed to ensure that unfiltered air does not enter the hydraulic system.

(5) Nameplates indicating oil type and system capacity shall be provided on or near the oil tank.

(6) Filter the working fluid specified by the equipment to the required cleanliness level and inject it into the system.

(7) Only when the hydraulic device is connected with the working mechanism can the predetermined work be completed, so Drill hydraulic motor Attention must be paid to the connection and assembly quality between them (centrality, relative position, stress condition, fixing method, sealing quality, etc.).