Crusher is a machine and equipment used for crushing, manufacturing and processing of iron ore, Axial flow distribution cycloidal hydraulic motor The common crushers in the sand production line include jaw crusher, impact crusher and cone crusher, Hydraulic winch Sweeper cycloidal hydraulic motor Crusher crushing iron ore will also cause serious damage to machinery and equipment, so attention should be paid to the detection of ore crusher. Cycloid Oil motor The manufacturer will talk to you here about some convenient and quick inspections that must be paid attention to for ore crusher.

1. The connectors of the crusher motor, reducer, four column hydraulic press coupling, automobile engine, tail rudder and other parts shall be complete, intact and tightened as far as possible. The reducer and hydraulic machine shaft coupling shall be free of oil seepage and oil leakage, and the remaining oil shall be appropriate.

2. The signal shall be smart and reliable as far as possible, and it is forbidden to start the machine without signal. The sprayer and watering machine shall be in good condition.

3. Clean the coal, gangue brick and dirt near the machine head, motor and reducer.

4. The switching power supply circuit cable and operation process line shall be hung as neatly as possible without extrusion.

5. The steel bar connection between the car engine and the tail rudder of the rotary cutting machine should be appropriate.

6. The drive chain of the scraper drive system is appropriate, and the scraper and screws should be fully tightened as far as possible.

7. The traveling car of the rotary cutter shall be as stable and reliable as possible.

8. When the rotary cutter is started under some conditions of the bridge body, there should be no abnormal sound in the operation of each part, and the scraper, transmission chain of the transmission system, and connecting ring should be free of torsion, twist twist, and bending deformation.

9. The coal roadway bolt support at the crusher and crusher shall be intact and firm as far as possible.

    10、 Hydraulic cycloidal motor manufacturer's direct sales It is necessary to ensure that the safety factor protection net and maintenance machinery and equipment of the crusher are reliable and not deformed or invalid.