To reduce Hydraulic transmission In system application Cycloidal motor for traveling reducer The pressure energy loss in the system should be gradually from the inside to reduce the output power loss while reducing the pressure loss in the system software. To solve this problem, the pressure loss of the internal flow passage of the components can be improved, and the integrated control circuit and forging flow passage are selected. At the same time, it is also necessary to reduce or eliminate the loss of throttle valve in the system software, reduce the total overflow flow that is not necessary for safety as far as possible, and prevent the use of throttle valve system software to adjust the total flow and pressure.

In the application of raw materials, raw materials manufactured by negative pressure technology and new rubber seals can be selected, so that friction losses can be reasonably reduced. Special cycloidal motor for hydraulic winch In application, maintenance is necessary. Maintain the hydraulic motor immediately to prevent environmental pollution from harming the service life and stability of the motor. It is necessary to develop new pollution monitoring methods and carry out automatic measurement of environmental pollution. It is necessary to adjust immediately, and do not allow backwardness, so as to prevent losses caused by untimely solutions. In order to reduce pressure energy loss of hydraulic motor, the manufacturer and customers must work together to avoid pressure energy loss to a large extent. How to reduce the loss of hydraulic motor in the whole process of application

The cleaning of the natural hydraulic motor is also important. The hydraulic motor generally needs to be cleaned before it is announced to be delivered for use. The purpose of cleaning is to eliminate the residual pollutants, metal material scraps, chemical fiber chemicals, iron cores, etc. in Madane. In the first two hours of work, even if the motor is not completely destroyed, a series of common faults will also be caused. Therefore, the motor oil passage should be cleaned according to the following process:

1. Clean the oil tank with an easy drying organic solvent, and then remove the organic solvent sediment with filtered gas.

2. Clean all pipelines of the motor. In some cases, prepreg the pipelines and connectors.

3. Install oil filter on the pipeline to maintain the oil pipeline and pressure pipeline provided by the valve.

4. Use a cleaning plate on the collector to replace high-precision valves, such as electro-hydraulic servo valves.

5. Check whether the specifications of all pipelines are suitable and the connection is proper.

To ensure the above two points, we can basically reduce certain consumption in the application, but we often encounter different problems in the application of the plunger pump hydraulic motor, because the working standard of the hydraulic motor is unique, and there are six unique points that we must pay attention to when applying it.