Network optimization information:

BM2 motor is a shaft wiring gear hydraulic motor, which is suitable for driving injection molding machines, small vehicles and machinery.

Features of BM2 motor:

It is designed with inserted tooth stator and rotor pair, with stable operation and long service life.

Low starting pressure, easy to replace.

The hydraulic system can be used in series or parallel.

Positive and reverse cycloidal hydraulic motor Reliable sealing control means can withstand high pressure to ensure that the motor has no leakage.

Various installation and connection forms of flange, output shaft, oil port, etc.

Small size and compact structure.

Description: Description:

Working pressure refers to the allowable inlet pressure.

The rated working pressure refers to the working pressure difference.

. Do not use the motor at the same time under speed and pressure.

The operating conditions allow for 6 seconds.

Recommended oil: wear-resistant hydraulic oil, viscosity 37~73cst, oil cleanliness ISO18/13.

The operating oil temperature is 80 ℃.

·Before the motor works under full load, it must be run in at 30% of the rated pressure for more than 1 hour.

Reliable dynamic seal control means, the allowable back pressure of the motor reaches 7Mpa. In order to obtain good service life and comprehensive performance, Bm4 cycloidal hydraulic motor It is recommended not to exceed 3.5Mpa. If it exceeds 3.5Mpa, the leakage pipe must be connected. When connecting the leakage pipe, it must ensure that the motor is always full of oil. The oil leakage pipeline must maintain a certain back pressure with throttling above 0.35Mpa. In addition to maintaining a low back pressure external oil drain pipe, it can also take away the wear pollution generated in the motor, resulting in a certain cooling effect.