The integration of machine telecommunication network is not a simple integration of electromechanical engineering and information technology. The system software composed of it must have five functions: the function of inspecting and identifying the goals and standards in work, the function of making management decisions independently according to work planning, and the function of servo motor to respond to management decisions and implement posture, It has the function of full automatic detection and self adjustment, self maintenance and common fault removal. This is also some actual overall goals of the intelligent system of construction machinery equipment. In the future, construction machinery and equipment will be connected from partial automation technology to automation technology, and will develop towards the development trend of long-distance manipulation and automatic driving. With the intervention of artificial intelligence technology, construction machinery equipment will accelerate its intellectualization process, making it gradually linked to the overall goal of working intelligent robots of completely intelligent systems. At that time, some new intelligent roboticized workflow will emerge.

Moreover, the standardization and integration of parts and components are further improved, and the simplified maintenance is a key indicator of overseas technical development trend. For example, the actual operating rocker, knob switch, instrument panel in the car, and anchor bolt screw cap in the car cab have been completely marked, integrated, and assembled, greatly reducing the manufacturing cost of the car cab.

     Conveyor belt cycloidal hydraulic motor Generally, two pumps or three pumps are used for oil supply, and the main oil is supplied by an independent main pump. In some hydraulic presses, the output power required by the components is large and must be combined for oil supply. There are two methods for combining: in valve combining. Generally, a valve rod is provided for two pump confluence, and the components are operated by the general rod of the valve to supply oil to the hydraulic press required for confluence. The diameter design scheme of the valve rod of this confluence method must take into account the virtual total area of commodity flow for multi pump oil supply. Cycloidal hydraulic motor of snow sweeper , converging outside the valve. According to the respective valve stems and the two valve universal linkage operation, the two pumps supply oil to the hydraulic press for the required confluence outside the valve stems. Although the control structure is relatively complex and has a large volume, the valve stem diameter is relatively small and may be universal with other valve stems because the flow through the valve stem is the total flow of a single pump.