For jaw crusher and impact crusher Bm cycloidal hydraulic motor As for the ore crusher machinery and equipment used for iron ore crushing production and processing, it is necessary to check the operation status of the equipment on time, keep an eye on the damage of the ore crusher, and start Zhuoya mine equipment to talk about some key points in the maintenance of the ore crusher.

The customer must regularly maintain whether the parts of the stone crusher are loose. If they are loose, they should be tightened immediately; Regularly maintain the application of bits, jaw plates and other spare parts, and properly handle any problems found. That can increase the service life of the stone crusher and reduce the cost of maintenance.

Always check the lubrication condition of the stone crusher. The temperature of the motor rotor bearing of the stone crusher should be kept below 60 ℃, not more than 70 ℃. If overheating is found, find out the cause and take some effective measures to remove it immediately. In addition, lubricating raw materials shall be used according to different regulations. Some bearings must be greased, and some bearings may be greased.

     Cycloidal hydraulic motor with brake In the ordinary maintenance, Zoya reminded us that we should be careful to maintain the surface of high-precision mating parts to avoid pollution and destruction of the smoke and dust environment. If the stone crusher is stored outside for a long time, it is suggested to apply oil or antirust oil on the surface to avoid harming all normal work after rusting. Key points of maintenance during loading, unloading and handling of stone crusher When loading, unloading and handling the parts of the fine crusher crusher, there must be copper bars or corresponding protective layer cushion blocks. It is not allowed to immediately hit with a hammer to avoid damage and cracks due to them.