For band Axial plunger hydraulic motor The reaction crusher and its hammer crusher, which are used for the production and processing of iron ore crushing, must check the operation status of the equipment on time, pay attention to the damage of the ore crusher at all times, and start the equipment here to talk about some key points of the maintenance of the ore crusher.

The customer must regularly maintain whether the parts of the stone crusher are loose. If they are loose, they should be tightened immediately; Regularly maintain the application of bits, jaw plates and other spare parts, and properly handle any problems found. That can increase the service life of the stone crusher and reduce the cost of maintenance.

Always check the lubrication of the stone crusher Cycloidal motor with large radial force The temperature of rotor bearing shall be maintained below 60 ℃ and not more than 70 ℃. If overheating is found, the cause shall be found out and certain effective measures shall be taken immediately to remove it. In addition, lubricating raw materials shall be used according to different regulations. Some bearings must be greased, and some bearings may be greased.

In the ordinary maintenance, Zoya reminded us that we should be careful to maintain the surface of high-precision mating parts to avoid pollution and destruction of the smoke and dust environment. If the stone crusher is stored outside for a long time, it is suggested to apply oil or antirust oil on the surface to avoid harming all normal work after rusting. Key points of maintenance during loading, unloading and handling of stone crusher When loading, unloading and handling the parts of the fine crusher crusher, there must be copper bars or corresponding protective layer cushion blocks. It is not allowed to immediately hit with a hammer to avoid damage and cracks due to them.