How can the hydraulic press cycloidal motor pair and misaligned motor rotor pair overturn? The stator motor rotor is correct, because the relative position of the motor rotor and the port plate is incorrect. The cycloidal motor is divided into two types: shaft flow distribution and inner hole flow distribution.

The method of shaft flow distribution On the main shaft bearing, you can make a mark on the bearing end cover against an oil groove, and against the minimum sealing cavity of the rotor stator pair. Try it. If you want to turn it over, it would be better to make another tooth wrong. The method of inner hole flow distribution is the port plate. According to the connection between the port shaft and the rotor, after the motor stator pair is installed and rotated, it is OK to accurately measure the deep layer of the sealing cavity. If the clockwise cavity of the least sealing cavity is deeper than the cavity in the opposite direction, it is a positive rotation, and the reverse is a reversal.

The deep layer is the sum of rotor stator, baffle plate and port plate. The key reason lies in the valve plate. Generally speaking, when the side of the port plate is filled with liquid, the cavity (high pressure cavity) that just goes to the clockwise side of the least sealing cavity of the rotor stator is the forward rotation.

Improve Cycloid hydraulic motor Is there a good way to rotate the speed of:

Increasing the total flow can certainly increase the speed, but it will more or less harm its service life. If it is within the maximum power range, there is no problem. If the steam pressure reaches the rated working pressure, and the speed is increased, it will exceed the output power range that it can bear, and the cycloid will naturally Hydraulic motor Its service life is harmful, just like the stomach will be broken if you can't eat so much.

The total flow can only be increased by a relatively limited speed. When the speed is increased from 500 to 900, it is proposed to replace the motor with a new model and specification. The total flow of the cycloidal motor is increased to a certain level, and the speed is not easy to rise indefinitely. The internal steam pressure rises, the internal leakage expands, the efficiency decreases immediately, or the motor is damaged.

The above discussion can be tried. If you feel wrong, you can consult the relevant authority experts of cycloidal hydraulic motor.