4K Cycloidal hydraulic motor speed The ratio reduction may be caused by the following reasons:

1. The pump is damaged, the pump casing is overheated and causes noise.

2. When the valve is opened, the valve emits a beeping or hissing sound, and some parts are overheated.

3. The pressure regulating valve is closed tightly or the oil pump system software provided is not smooth, and part of it is overheated.

    4. Sample of cycloidal hydraulic motor Too much leakage, and the leakage of single oil discharge pipeline is too much, and the oil volume is high.

5. The valve chamber is hot due to excessive leakage of the distribution rotary valve.

Solutions to the above aspects:

     MSE internal curve hydraulic motor Replace the pump and scientifically study the cause of its damage. Check the valve. If it is intact, check the working pressure of the system software, check and correct it. For the fourth point, the following four points can be solved:

a. Check oil viscosity and operating temperature.

b. Check the tightness of the cylinder piston.

c. Check the condition of the surface.

d. Check the condition between the crankshaft and the rack surface and the sealing condition of the valve.