The counter roll crusher is also a common machine equipment for iron ore crushing. The counter roll crusher can be used for the production and processing of a variety of iron ores, including dolomite, limestone, dolomite and granite, As the equipment manufacturer of iron ore production and processing industry, we should remind everyone to pay attention to the water content of raw materials produced and processed by roller crusher, which is very harmful to the equipment.

For low speed Plane flow distribution cycloid motor In terms of production and manufacturing of machinery and equipment, there are many hazards, and three key ones. Among them, the characteristics of raw materials are very harmful to productivity, and the water content, strength and composition are likely to cause harm.

The harder the raw materials are, the harder the work will be. Excessive water content may lead to sticking and endanger the normal operation of the conveyor belt. The more ultra-fine powder contained in raw materials, the more harmful the transmission rate and production progress will be. The second is the tooth angle. The intersection angle of the tooth angle is enlarged, and the production efficiency is reduced.

     Axial plunger hydraulic motor On the contrary, if the intersection angle of the tooth angle is too small, the particle size distribution of the crushed goods will be reduced. What type of grinder reduces the feeding amount, and the total output will be greatly reduced. Then comes the size of the ore discharge port of the roll crusher. The size of the ore discharge port is adjusted according to the provisions of the ore discharge particle size distribution in the specific production and manufacturing work. Under the provisions of ensuring the commodity particle size distribution, the ore discharge port should be adjusted as high as possible to improve productivity.