High torque cycloidal hydraulic motor When the inertia moment of the promoted part is large, if it is required to ensure braking or reverse and forward running in a short time, a gate valve cache file should be set in the pump oil passage to prevent a large four column hydraulic machine from damaging the safety production accident.

2. When using the qualitative analysis of motors, if you want to start and stop smoothly, you should use the necessary pressure control or flow management methods in the design of the control circuit scheme.

3. When the hydraulic motor is used as a common lifting tool or as a driving force for traveling machines and equipment, the speed limiting valve shall be set as far as possible to prevent the vehicle from speeding when the lifting system such as the lifting system lands quickly or the vehicle goes downhill, which may cause serious production safety accidents.

4. Because BM cycloidal hydraulic motor There will always be leakage, so close the inlet and outlet of the hydraulic motor for braking, and it will still move slowly. When long-term braking is required, the brake to prevent rotation should be set again.

5. When starting with full load, pay attention to the starting torque value of the hydraulic motor, because the starting torque of the hydraulic motor is smaller than the rated current torque, and if ignored, it is likely to make the working mechanism unable to operate.

6. Because Cycloidal hydraulic motor of mixer The back pressure type (outlet pressure) of the oil valve of the motor must be higher than the atmospheric pressure, so the oil discharge pipeline of the motor must be led back to the vehicle oil tank separately, and cannot be connected to the oil return pipeline of the hydraulic motor.