To pulverizer High torque cycloidal hydraulic motor It is mainly used to crush raw materials such as iron ore, concrete, sodium bentonite, etc. The crusher is a kind of crusher equipment that is frequently used. As a production equipment such as crusher, the manufacturer should remind many customers to pay attention to the problem that the machine cannot be started normally in the application of the roller crusher. Zhuoya summarized several solutions for everyone to see.

1. Viscosity of lubricating grease: when the pulverizer is started, the viscosity of lubricating grease on the drum is too high, and the friction resistance of the machine bearing transmission system is expanded, making the drum unable to start the machine.

2. Waste in the crushing chamber: when the drum finally stops running, it is impossible to remove the waste in the room. When the machine starts, the original start bears a very heavy load, which makes it difficult to start the machine.

    3. Cycloidal hydraulic motor of mixer Bearing damage: the roller bearing has a high load in the whole process of operation, causing excessive damage to the mechanical equipment bearings, the bearing wheel is stuck in the whole process of rotation, and the machine is difficult to start.

4. Ash removal elements: The roller will cause a lot of dust in the whole process of machine operation, and some dust will fall on the bearing along the protective cover, mixed with vegetable grease, reducing the wettability of grease, and making it difficult to start machinery and equipment.