There have been many articles for you to explain the relevant hydraulic motor overview and its characteristics and advantages. Today, we will make up some new professional skills for you again, hoping to bring you more perfect information professional skills. Welcome to pay attention to you again. The hydraulic motor is an electronic component of the hydraulic transmission system software system. It changes the hydraulic pressure energy given by the hydraulic pump into the mechanical kinetic energy (torque and reduction ratio) of the industrial equipment of its output shaft. Liquid is a compound that transmits force and motion. Hydraulic motor , also known as oil motor, is mainly used in injection molding plant industrial equipment, ships, hoists, construction project industrial equipment, construction engineering industrial equipment, coal mining machinery, mining equipment machinery, metallurgical equipment, and ship accessories.

Application field Cycloidal hydraulic motor with brake Also called oil motor, it is mainly used in injection molding plant industrial equipment, ships, hoists, construction project industrial equipment, construction engineering industrial equipment, coal mining machinery, mining equipment and machinery, metallurgical equipment, ship accessories, petrochemical equipment and machinery, port machinery, etc. High speed motor gear motor has the advantages of small size, light net weight, simple structure, good performance indicators, less sensitive to the environmental pollution of engine oil, small impact resistance and torque formula, etc. The defects are that the torque pulsating beverage is very large, the efficiency is low, the starting torque is small (only 60% - 70% of the rated voltage torque), and the low gear efficiency is poor. Characteristics From the point of view of the magneto fluid generator, the hydraulic pump and hydraulic motor are engineering machinery accessories for cross working. Entering working liquid into all kinds of hydraulic pumps can change them into working conditions of hydraulic motors; On the contrary, when the spindle bearing of the CNC lathe with hydraulic motor rotates from the external torque control board, it can also become the working condition of the hydraulic pump.

Because they have the same Positive and reverse cycloidal hydraulic motor Basically, structural factors -- closed capacity and relative oil distribution organization that can be changed periodically. However, because the working standards of hydraulic motors and hydraulic pumps are different, and their characteristics are also different, there are still many differences between hydraulic motors and hydraulic pumps of the same type. Initially, the hydraulic motor should be able to rotate forward, so its internal structural symmetry is specified; The reduction ratio range of hydraulic motor shall be as large as possible, and the minimum stable reduction ratio shall be specified. Therefore, cylindrical roller bearings or needle roller bearings with negative working pressure are generally selected; Secondly, because the hydraulic motor works under the standard of keyed working pressure oil, it does not need to have self-priming professional skills, but try to be as original as possible to give the indispensable motor torque