1、 The noise generated by the hydraulic motor is enlarged; The reason is:

1. Considering that the working pressure of the electric hydraulic pump or the total flow exceeds the rated current. The solution is: find out the reasons for the fluctuation of working pressure and total flow;

    2、 Low speed high torque hydraulic motor Internal parts (such as spindle bearing, rotor, needle roller bearing, etc. of CNC lathe) are damaged. The solution is: at first, dismantle, inspect, repair and replace the hydraulic motor. If the motor is replaced with a new part, or the noise is very loud, and the problem is not solved, then consider replacing a new hydraulic motor industrial equipment;

3. Because of the environmental pollution of automobile oil, the sliding friction of fitness sports parts is expanded. The solution is to check and eliminate Hydraulic transmission The system software system filters the car oil for several times or it is really not easy to replace it with new car oil with zero air pollution and no sediment;

    4、 Cycloidal hydraulic motor brake It is found that the looseness and load caused by the internal fitness parts. The solution is: correct the internal parts, bind the loose parts or replace them with new ones;

5. If it is destructive or cavitation of the four column hydraulic press of the system software. The solution is to check and remove the steam in the sewage treatment plant.

Possible problems of hydraulic motor in application and corresponding solutions

There are still some other problems that are likely to arise. Next time, I will give you an analysis, and you will persevere in updating the website content, such as hydraulic motors, Hydraulic winch Problems that should be paid attention to in the application of hydraulic products such as sewage treatment plants, or problems such as how to select the specifications and models of hydraulic products, the daily maintenance of hydraulic products, and the composition and characteristics of hydraulic products.