Hydraulic motor of agricultural machinery The utility model relates to a hydraulic press motor with an internal cycloidal gear type, which is a medium and small size, low speed gear and large torque. It has simple structure, good low-speed gear characteristics and strong overweight working capacity in a short term. agricultural machinery Hydraulic motor There is a motor stator and a theme activity blade inside. The motor stator, blade and rotating shaft divide the motor into two cavities. Each cavity has an oil port. When one oil port enters the liquid, the other will emit oil, and the promoting blade of the liquid inlet will shake. So do you understand what must be paid attention to during operation? Jining Heqi Hydraulic Equipment Co., Ltd. welcomes your inquiry.

First check before operation Hydraulic transmission Whether all components of the system are properly connected, add oil into the specific height width ratio according to the filter element. Start and run under no load for 10~15 minutes, and carry out the operation. There is foam plastic in the exhaust pipe and car oil tank, there is noise in the system software, and there is stagnation in the motor hydraulic cylinder, all of which confirm that there is gas in the system software.

After removing the gas, fill the fuel tank of the vehicle with oil, and gradually lift the load of the agricultural machinery hydraulic motor until it is loaded for a long time. Check whether there are abnormal conditions, such as noise, oil rise and oil seepage. The oil shall be removed and replaced once according to the operation time of 50 hours, and then the oil shall be removed and replaced according to the maintenance standards. If it is not a common fault of the motor, please do not disassemble it.