Network optimization information:

BM3 motor is an axial distribution with rolling bearing support Cycloid hydraulic motor ， Cycloidal hydraulic motor with brake It is suitable for lifting and slewing drive of injection molding machine, fishing boat net lifter and small crane.

Features of BM3 motor:

The double bearing support structure can bear large radial force.

The flange is integrated with the shell and can withstand frequent reverse impact.

*Toothed stator and rotor set is adopted, with stable operation and long service life.

High working pressure.

Low starting pressure, convenient reversing.

It can be used in series or parallel in the hydraulic system.

Reliable sealing control means, Cycloidal hydraulic motor of pump truck It can withstand high voltage and ensure that the motor does not leak.

Description:

The working pressure refers to the allowable pressure at the inlet.

The rated working pressure refers to the working pressure difference.

The motor shall not be used at the same time under speed and pressure.

The allowable duration of the operating conditions is 6 seconds.

Recommended oil: anti-wear hydraulic oil, viscosity 37~73 centistokes, oil cleanliness ISO18/13.

The operating oil temperature is 80 ℃.

Before the motor works at full load, it must be run in at 30% rated pressure for more than 1 hour.

Reliable dynamic seal control means. The allowable back pressure of the motor can reach 7Mpa. In order to obtain good service life and comprehensive performance, it is recommended not to exceed 3.5 MPa. If the limit is exceeded, the leaking tubing needs to be connected. When connecting the leaking oil pipe, make sure that the Madane is always full of oil. The leaking oil pipe shall be throttled to keep the back pressure above 0.35 MPa In addition to maintaining a low back pressure, the leaking oil pipe can also take away the wear and pollution caused by the motor and produce a certain cooling effect.