Network optimization information:

Selection of working hydraulic oil:

(1) Mineral oil: It is recommended to use high-quality mineral based hydraulic oil with anti-wear, anti foam, anti-oxidation and high-pressure additives. At this time, the ideal operating oil temperature is 30 ° C~50 ° C, and the allowable temperature is - 20 ° C~80 ° C. Under special circumstances, high-performance hydraulic oil can operate at - 40 ° C~120 ° C, some viscosity is 40~60 cm, and the allowable viscosity is 5~3000 ° C.

(2) Water based emulsion: when emulsion is used as the medium, the allowable pressure is less than 15 MPa, the allowable rotational speed is reduced by 50%, and the allowable temperature is between 10 ℃ and 60 ℃. When emulsion is used as the medium, users should contact our company in time to ensure that qualified products are provided.

Oil filtering requirements: the recommended filtering precision of the motor is 25 microns. For shaft steering, Hydraulic winch In addition to the special oil separator for noise reduction, the AKS motor can rotate in both directions. The standard motor rotates counterclockwise from the inlet and outlet oil shaft at the rear A outlet, and clockwise from the inlet and outlet oil shaft at the B outlet. When the user requests reversal, please indicate in the order that the company can provide reversal products.

AKS and YLM motors are allowed to be installed in any direction for the positioning of oil unloading pipes. However, in order to ensure the lubrication of the motor's moving pair, Hydraulic transmission The housing of the motor needs to be filled with hydraulic oil during operation. For motors with output shaft upwards, hydraulic oil must be injected into the motor housing before installation (that is, air must be discharged). When installing upward, plug the oil drain port. After installation, connect the oil drain pipe as shown in the figure. When connecting the oil drain pipe, try to prevent oil leakage in the housing.