Network optimization information:

(1) The mounting and fixing bracket of cycloidal hydraulic motor shall be rigid enough. When the system has pressure impact, the motor is not allowed to vibrate, which is easy to damage the motor.

(2) The motor output shaft shall be coaxial with the center line of the coupling connected.

(3) When the oil inlet and return of the motor are steel pipes, the pipeline stress shall be completely removed, OMH hydraulic motor Piping is not allowed to function on the motor. Low speed high torque hydraulic motor Pay attention to the oil return resistance when connecting the oil drain pipe. Below 0.3MPa, the tank shall be accessed separately and shall not be connected in series with other oil return pipelines. High return oil resistance (back pressure) will lead to poor technical performance of the motor.

(4) Before the completion of motor installation, clean hydraulic oil must be injected into the motor housing from two oil ports. Rotate the output shaft and install it when there is no abnormality.

(5) The radial load on the motor output shaft shall not exceed the specified value. Otherwise, it will affect the reliability of the motor and shorten its service life.