Cycloid hydraulic motor yes Hydraulic motor One of them is an energy conversion equipment that converts hydraulic function into mechanical kinetic energy, which is used to drive mechanical parts for rotational fitness exercise. The cycloidal hydraulic motor is famous for its internally integrated cycloidal stator and rotor. The rotor in the cycloidal stator and rotor is linear from the cycloidal pitch line. The motor stator and rotor cooperate with each other to remove and drain oil from the motor, and then drive the fitness movement components to rotate. The classification and advantages of this machine and equipment are explained in detail below.

The cycloidal hydraulic motor is mainly used for general purposes, and it is mainly used in the rotating organization of various mechanical equipment such as agriculture and animal husbandry, aquaculture, light industry, hoisting and transportation, mining, engineering machinery and equipment. The cycloidal hydraulic motor belongs to the low-speed high torque motor, that is, the speed ratio category belongs to the low-speed gear, generally in the middle of 10-500 revolutions, and normally above 500 revolutions, it belongs to the fast motor, orbit motor When the speed is above 500 rpm, the output torque is very limited, so it is not suitable for the motor to work. Therefore, it is strongly recommended that the applicable speed ratio of cycloidal motor be 10-500 rpm.

The output torque of the cycloidal motor is relatively large compared with other types of hydraulic motors. The key reason is that the displacement of the cycloidal motor is relatively large. In the large family of cycloidal motors, the small displacement guarantees 8cc/r, while the large displacement guarantees 1600cc/r. The displacement of the motor is generally above 50cc/r under suitable working conditions. Below 50 is mainly for better speed, Generally, the displacement of transmission gear motor or plunger pump motor is relatively small, but the displacement is several hundred. The displacement above 200 belongs to very large.

Advantages of cycloidal hydraulic motor:

1. Small in size and light in weight, its size is much smaller than other types of hydraulic motors with the same torque.

2. The speed ratio covers a wide range, and the stepless speed change is possible. The small stable speed ratio can reach 15 rpm. The installation layout is convenient, and the project investment cost is low.

3. In cycloidal hydraulic motor Hydraulic transmission The system can be used in series or in series.

4. The rotating inertia force is small, and it is very easy to start under load. Both forward and reverse rotation can be applied, and there is no need to shut down when changing phase.