Welcome to the official website of Ningbo White Hydraulic Technology Co., Ltd!

Service hotline:

eighteen billion sixty-seven million two hundred and thirty-eight thousand eight hundred and seventy-two

 BM cycloidal hydraulic motor
Your current location: home page > News Center > Industry News

Application of hydraulic motor on uncoiler

2021-05-31 17:27:55
second

    

Today Hydraulic motor It is widely used in uncoilers,

When the clutch is in regular operation, the material roll can also be rotated according to the mechanical arm on the right vertical pole. When the speed is high, the clutch must be released. To prevent the outer layer of the coil from being scratched, the uncoiler starts with a motor- Reducer The structure is complicated. The key role of the uncoiler is to support and control the opening and acquisition of the coil, and it is difficult to process the internal and external gear shafts. The main shaft bearing is equipped with a three jaw wedge organization, and the transmission gear clutch is a mechanical equipment clutch. It not only meets the requirements of coils with different inner diameters, the upper and lower upright rods can be separated or close to each other under the effect of the hydraulic system, and the noise is loud, and the coils are suspended in the air. In production and manufacturing, it is often necessary to prepare or cut materials. In order to better handle the above problems, the reducer has a self-locking function. It rotates according to the main shaft bearing of the drive chain drive.

It is found that the hydraulic motor is particularly suitable for the working conditions of the uncoiler: the transmission torque is large, the gear transmission parts are few, and there is no tooth beating or tooth loss. Therefore, the layout is convenient. Stable operation, good stability, stepless speed change, increased cost and simple installation. It is not easy to self lock and is small in size. Double operation transmission system, reducer. The utility model solves the problems that the transmission chain is easy to break and the fixed anchor bolt of the reducer is easy to loosen.

(3) The hydraulic function is changed into the mechanical kinetic energy transmission system, and the complicated mechanical equipment clutch is eliminated, so the noise is very low.

     Application of hydraulic motor on uncoiler

Recent browsing:

 BM cycloidal hydraulic motor

WeChat QR code

 BM cycloidal hydraulic motor

QQ QR code