Network optimization information:

(1) The intermittent working pressure of the motor refers to the allowable working pressure of the oil inlet of the motor, and the continuous working pressure refers to the pressure difference between the oil inlet and the oil return port.

(2) It is not allowed to use the motor at speed and pressure.

(3) Under intermittent working conditions, the running time of motor per minute shall not exceed 10%.

(4) The oil temperature is 80 ℃.

(5) Shaft sealing parts used for cycloidal motor, BM2 cycloidal hydraulic motor Generally, it can withstand higher working pressure, but in order to obtain good service life and comprehensive mechanical performance, it is recommended to use the back pressure below 5MPa. If it exceeds 5MPa, connect the external leakage pipe. When connecting the external leakage pipe, ensure that the motor is always full of oil. In addition to maintaining low back pressure external oil drain pipe, Cycloidal hydraulic motor for mold adjustment It can also take away the wear pollutants generated inside the motor, producing a certain cooling effect.

(6) The motor needs a running in period before full load operation. It is recommended to run in for 1 hour under 30% of the working pressure.