Network optimization information:

BM1 motor is a small shaft with small size and light weight Cycloidal gear hydraulic motor It can be used in the slewing mechanism of injection molding machines, road sweepers, lawn trimmers, leather machines and other machines.

Features of BM1 motor:

: Small size, light weight, compact structure, no speed change mechanism, wide speed range.

Low starting pressure, convenient reversing.

: The hydraulic system can be used in series or parallel.

: Reliable sealing control device, High torque cycloidal hydraulic motor It can withstand high back pressure to ensure that the motor will not leak.

Multiple flange, shaft outlet, oil port and other installation and connection forms.

Description:

Working pressure refers to the allowable pressure at the inlet.

The nominal working pressure is the difference of the working pressure.

The motor shall not be used at the same time when rotating speed and pressure.

:: The maximum allowable duration of working conditions is 6 seconds.

Recommended oil: anti-wear hydraulic oil, 37~73cst oil viscosity is ISO18/13.

The operating oil temperature is 80 ℃.

:: Before full load operation, it must be run in for more than 1 hour at the rated pressure of 0%.

: Reliable sealing control means, the allowable back pressure of the motor can reach 7Mpa, but in order to obtain good service life and comprehensive performance, BMT hydraulic cycloid motor It is recommended that the back pressure should not exceed 3.5Mpa. If it exceeds 3.5Mpa, it is recommended to connect the drain pipe. After connecting the drain pipe, the motor should always be full of oil. The discharge oil pipe shall have a certain throttle to maintain the backpressure exceeding 0.35Mpa.

In addition to maintaining a low back pressure, connecting the external oil drain pipe can also bring out the abrasion materials generated inside the motor and produce a certain cooling effect.