Network optimization information:

Assembly rotation Hydraulic motor Components.

The assembly steps of the rotary hydraulic motor are the reverse of the above disassembly steps. Pay attention to the following issues during assembly:

Clean and fresh lubricating oil should be applied to the sealing ring and oil seal edge with the shape of 0.

When installing the cam disk on the housing, first make the pin installed on the cam disk consistent with the pin hole position on the housing, and then press the cam disk into the housing, Domestic hydraulic motor Install the cam disc at the socket of the housing. Note: The cam disk surface shall not be damaged, and plastic hammer and nylon rod are generally used for disassembly.

Pay attention to the following items when assembling the barrel assembly:

(1) The installation direction of the spring seat must not be inverted (2) Use a thick, thin and suitable guide rod to ensure that the spring seat is installed into the hydraulic cylinder barrel (3) Before each plunger is installed into the hydraulic cylinder barrel, A6V hydraulic motor The sliding surface should be coated with hydraulic oil, Fit the plunger bearing to the tilt angle of the cam plate.