Network optimization information:

The working principle of cycloid gear is not only applicable to hydraulic transformation mechanism, but also applicable to oil distribution mechanism. The hydraulic transmission mechanism is similar to the oil distribution mechanism (in fact, it is the same principle structure, because it plays different roles in different places, so the name given is also different).

The same question:

The structural operation principle is the same, and the stress and geometric structure are also the same.

difference:

In the hydraulic conversion mechanism, the active part is the cycloidal gear, and the passive part is the cycloidal pin gear. The main moving part of the refueling mechanism is the cycloidal needle wheel, and the passive part is the cycloidal wheel.

The hydraulic transmission mechanism is driven by high-pressure oil, and the oil distribution mechanism is driven by the oil distribution needle wheel fixed on the oil distribution cover.

The rotation ratio of the hydraulic conversion mechanism is 7:1, while that of the oil mixing mechanism is 1:7. however EPMZ cycloidal motor They are essentially the same, because their main functions are just opposite.

connect:

Hydraulic transmission The cycloid needle wheel of the mechanism is tightly connected with the left and right end caps through bolts, and the left and right end caps are connected with the oil distribution sleeve through screws, EPMZR cycloidal motor The oil distribution sleeve is connected with the cycloidal needle wheel of the oil distribution mechanism through screws, and the oil distribution sleeve is closely connected with the oil distribution shaft sleeve. Finally, the waist groove of the oil distribution shaft sleeve is transmitted with the high and low pressure oil of the hydraulic transmission mechanism to drive the cycloidal wheel to rotate.