Current label: Hydraulic motor
Hydraulic motor Give you a detailed introduction Hydraulic motor Product classification of, including Hydraulic motor The purpose, model, scope, pictures, news and price of all products under. At the same time, we have selected Hydraulic motor The classified industry information, price quotations, exhibition information, picture materials, etc. have won praise from users nationwide. For more details, please click to visit!
-
Network optimization data: motor technical index: pressure 20 millipascals; Volume: 200ml/r; Rotating speed 625r/min; Mechanical efficiency: 95% Torque: 562ngm; Noise: db (a); Work efficiency: 95%. It is mainly composed of output shaft, front end cover, tapered roller bearing, long spline shaft, short spline shaft, stator, rotor, fixed plate, pressure plate
-
Network optimization data: differences among hydraulic pumps, hydraulic motors and hydraulic cylinders: hydraulic pumps are used as power components to convert mechanical energy into oil pressure energy; The hydraulic motor cylinder turning belongs to the actuator, which converts the pressure energy of oil into mechanical energy; (2) Some hydraulic pumps have clear regulations on steering (such as gear pump, impeller pump, etc.). They can only rotate in one direction. The Portland hydraulic motor does not
-
Network optimization data: (1) Gear pump: a pair of meshing gears are separated from the suction chamber and discharge chamber of the pump cylinder. When the gear is driven, the volume between the teeth at the position where the teeth on the suction chamber side are separated from each other gradually increases, and the pressure decreases, and the hydraulic fluid enters the teeth under the effect of pressure difference. As the gear rotates, the liquid between the teeth is carried to the discharge chamber. At this point,
-
Network optimization data: hydraulic system (English name: hydraulic system) is a set of device that uses water as the working medium, uses the pressure energy of hydraulic oil, and uses marine hydraulic motors to operate hydraulic actuators by controlling valves and other accessories. The whole hydraulic system consists of five parts: power components, actuators, control components, auxiliary components (accessories) and hydraulic oil. liquid
-
Network optimization data: In order to realize the low-pressure hydraulic seal connection between the installation flange and the box, one of the following methods can be used. Add a proper gasket between the flange and the box. Install the O-ring into the sealing ring groove in the case lip. The minimum stop length shall meet the requirements of 0-ring. The section diameter of the hydraulic motor of the crusher shall be as follows: when the check valve diameter of the quantitative hydraulic motor is small
-
Network optimization data: Set up and adjust new hydraulic equipment. The general precautions are as follows: (1) When installing and assembling, first strictly clean the hydraulic components and auxiliary components installed in the main body to remove rust inhibitor and all dirt harmful to the working fluid. All blockage, plastic blockage, piping blockage, etc. of the hydraulic parts of the special cycloidal hydraulic motor and the oil ports of the piping for the snow sweeper
