Current label: Hydraulic motor
Hydraulic motor Give you a detailed introduction Hydraulic motor Product classification of, including Hydraulic motor The purpose, model, scope, pictures, news and price of all products under. At the same time, we have selected Hydraulic motor The classified industry information, price quotations, exhibition information, picture materials, etc. have won praise from users nationwide. For more details, please click to visit!
-
Network optimization data: internal curve multi-function radial piston motor (referred to as internal curve motor for short) is a low speed too torque motor, which is widely used in engineering machinery, mining machinery, lifting machinery and other departments. Composition of internal curve motor: stator (several sections are evenly distributed and the shape of the surface is identical), rotor, plunger set (usually including several parts such as plunger, beam and roller)
-
Network optimization data: structural characteristics In terms of structure, the main differences between gear motor and gear pump are as follows: gear pump generally rotates in one direction to reduce the path to unbalanced hydraulic pressure, so that the oil suction port is large and the oil discharge port is small. Moreover, 2K hydraulic cycloidal motor gear motor needs to rotate in both forward and reverse directions, so as to make the oil intake equal. Internal leakage of gear motor shall not be like that of gear
-
Network optimization data: hydrostatic bearing is supplied with pressure oil by external lubricating oil pump to form a pressure oil film to bear the load. Although many hydrodynamic bearings also use lubricating oil pumps to supply pressure oil, their properties are different. The most obvious is that the oil supply pressure is different. The oil supply pressure of hydrostatic bearings is higher than that of hydrodynamic bearings. Purpose: It often needs low-speed operation and high bearing capacity, 6K hydraulic pendulum
-
Network optimization data: the working principle of hydraulic pump and hydraulic motor is reversible, the structure is similar, and they are universal for cross-country use. The selection principle is basically the same. However, due to their different uses, there are some differences in structure. When selecting, pay attention to the similarities and differences between the two structures. Except that several hydraulic pumps can be interchanged with hydraulic motors, others cannot be interchanged. Generally to obtain
-
Network optimization data: low speed high torque hydraulic motor. The output torque of low speed hydraulic motors is generally large (from thousands to tens of thousands of Newtons), so it is also called low speed high torque hydraulic motors. The main characteristics of the BM cycloidal hydraulic motor are large torque and good low-speed stability (generally stable operation below 10r/min, some can be as low as 0.5r/min
-
Network optimization data: main performance parameters of hydraulic motor. (1) Operating and rated pressure. The actual pressure of the engine inlet fluid is called the engine working pressure. The difference between the inlet and outlet pressure of the motor is called the working pressure difference of the motor. In order to facilitate qualitative analysis of hydraulic cycloidal motor, when the motor outlet is directly connected to the oil tank, it is generally considered that the working pressure of the motor is equal to the working pressure
