Current label: Cycloid hydraulic motor
Cycloid hydraulic motor Give you a detailed introduction Cycloid hydraulic motor Product classification of, including Cycloid hydraulic motor The purpose, model, scope, pictures, news and price of all products under. At the same time, we have selected Cycloid hydraulic motor The classified industry information, price quotations, exhibition information, picture materials, etc. have won praise from users nationwide. For more details, please click to visit!
-
Network optimization data: leakage control includes two aspects: preventing environmental pollution caused by external liquid leakage and external environment intrusion. In the future, leak free components and systems will be developed, such as developing integrated composite components and systems, realizing pipe free connection, developing new sealed leak free pipe joints, motor oil pump combination devices, etc. Leak free will become one of the world's hydraulic industry in the future
-
Network optimization information: assemble rotary hydraulic motor components. The assembly steps of the rotary hydraulic motor are the reverse of the above disassembly steps. Pay attention to the following problems during assembly: the sealing ring with shape 0 and the edge of oil seal should be coated with clean and fresh lubricating oil. When installing the cam disk on the housing, first make the pin installed on the cam disk consistent with the position of the pin hole on the housing, and then
-
Network optimization data: motor technical index: pressure 20 millipascals; Volume: 200ml/r; Rotating speed 625r/min; Mechanical efficiency: 95% Torque: 562ngm; Noise: db (a); Work efficiency: 95%. It is mainly composed of output shaft, front end cover, tapered roller bearing, long spline shaft, short spline shaft, stator, rotor, fixed plate, pressure plate
-
Network optimization data: In order to realize the low-pressure hydraulic seal connection between the installation flange and the box, one of the following methods can be used. Add a proper gasket between the flange and the box. Install the O-ring into the sealing ring groove in the case lip. The minimum stop length shall meet the requirements of 0-ring. The section diameter of the hydraulic motor of the crusher shall be as follows: when the check valve diameter of the quantitative hydraulic motor is small
-
Network optimization data: the axis of the swing cylinder 8 and the piston 11 always passes through the center of the crankshaft bearing sleeve, so there is no transverse force between the swing cylinder and the piston. The high-pressure oil of the plunger hydraulic motor enters the oil distribution plate 3 that rotates with the crankshaft from the oil inlet of the oil passage 1, enters the upper part of the piston through the housing flow channel and the swing cylinder ear ring 7, and then enters the balance chamber at the lower part of the piston through the orifice. At this point,
-
Network optimization data: selection of working hydraulic oil: (1) mineral oil: it is recommended to use high-quality mineral based hydraulic oil, and add anti-wear, anti foam, anti-oxidation and high-pressure additives. At this time, the ideal operating oil temperature is 30 ° C~50 ° C, and the allowable temperature is - 20 ° C~80 ° C. Under special circumstances, high-performance hydraulic oil can operate at - 40 ° C~120 ° C
