Hydraulic motor manufacturer What is the basic concept of? What kind of promotion? Basically, how is the basic principle of the work content actually operated? The following details:
6K hydraulic cycloid motor In application, the transmission shaft will not be driven by the transmission device any more, but only connected with the organization in work. Input the working pressure oil from the oil inlet hole. The working pressure oil enters the working chamber of the motor according to the flow channel after passing through the oil inlet hole, and causes the hydraulic machine interaction force that promotes the plunger pump above the plunger pump. Because the cam has the existence of eccentricity, the interaction force will produce a torque to the rotating management center of the cam, Make each cam and transmission shaft rotate clockwise; Because of the inertia force, the cam will turn to the geographical position and then rotate clockwise to shift the plunger pump, leaving the completed oil in the working chamber to, and the oil drain valve and outlet of the single project will discharge to the car tank;
Because the relative positions of the two cams are suitable, the hydraulic motor can close the oil drain valve in the case of liquid inlet and the other oil inlet valve in the case of oil discharge, so as to facilitate the completion of flow distribution. If Luanmusi inputs the working pressure oil from the oil inlet of the hydraulic motor, the motor can push the working organization connected with the drive shaft to complete the continuous clockwise rotation fitness exercise. In addition, the used oil is continuously transmitted from the oil drain valve.
Low speed high torque hydraulic motor It is similar to the condition of hydraulic oil pump. If the direction of oil is reversed, in other words, the area of oil inlet is changed to the oil inlet and the oil inlet is drained, then the rotation direction of the transmission shaft or motor rotor must also be reversed, in other words, rotate in the opposite direction.
