The impact mill is a common crushing production equipment for medium and crushing, Hydraulic motor of cone crusher There are many raw materials that can be produced and processed by the reaction crusher, and it can be used by common dolomite, rice wheat stone, etc. Start Zhuoya here to talk to everyone about the key part of the reaction mill, that is, the bearing, and remind everyone that the temperature of the bearing should not exceed 70 ℃.

Zhuoya reminds us to regularly maintain whether the parts of the stone crusher are loose, and if they are loose, they should be tightened immediately; Regularly maintain the application of bits, jaw plates and other spare parts, and properly handle any problems found. That can increase the service life of the stone crusher and reduce the cost of maintenance.

Always check the lubrication condition of the stone crusher. The temperature of the motor rotor bearing of the stone crusher should be kept below 60 ℃, not more than 70 ℃. If overheating is found, find out the cause and take some effective measures to remove it immediately. In addition, lubricating raw materials shall be used according to different regulations. Some bearings must be greased, and some bearings may be greased, which shall be selected according to regulations.

During normal maintenance, Sweeper cycloidal hydraulic motor The stone crusher shall be careful to maintain the surface of high-precision mating parts to avoid dust pollution and destruction. If the stone crusher is stored outside for a long time, it is suggested to apply oil or antirust oil on the surface to avoid harming all normal work after rusting. Key points of maintenance during loading, unloading and handling of stone crusher When loading, unloading and handling the parts of the fine crusher crusher, there must be copper bars or corresponding protective layer cushion blocks. It is not allowed to immediately hit with a hammer to avoid damage and cracks due to them.