Hydraulic motor of cone crusher It is a machine used for iron ore crushing, production and processing. The common crushers in the stone production line are jaw crusher, impact crusher and cone crusher. The crushing of iron ore by the crusher is also a serious damage to the equipment. Therefore, attention should be paid to the inspection of the ore crusher. Axial flow distribution cycloidal hydraulic motor Here, I would like to tell you what the inspection convenience of the ore crusher must pay attention to.

1. The connectors of the pulverizer motor, reducer, hydraulic coupling, engine, tail and other parts must be complete, intact and tightened. The reducer and hydraulic machine shaft coupling shall be free of oil leakage, and the remaining oil shall be moderate.

2. The data signal must be smart and reliable. It is forbidden to start the machine without signal. The water spraying equipment of the sprayer shall be intact.

3. Clean the coal, gangue and dirt around the machine head, motor and reducer.

4. The switch power cable and the actual operation line must be hung neatly without extrusion.

5. The lapping of steel bars at the end of the scraper belt conveyor engine and the rotary cutter on the workbench shall be suitable.

6. The scraper drive chain is important and appropriate, and the scraper and screws must be complete and tightened.

7. The car must be stable and reliable.

    8、 Variable hydraulic motor When the rotary cutter is started up under some conditions of the bridge body, there should be no abnormal noise in the operation of all parts, and the scraper, transmission chain, and connecting ring should be free of torsion, twist twist, and bending deformation.

9. The bolt support of coal roadway at the pulverizer and pulverizer must be intact and firm.

10. It is necessary to ensure the safety of the pulverizer. The safety protection net and protection equipment shall be reliable and not deformed or invalid.