Hydraulic valve is a more common system software in industrial production, which is used to control the fluidity of oil in the hydraulic system, and can also reasonably adjust the working pressure and total flow. There are three key hydraulic valves, namely pressure valve, directional valve and flow valve. For valves with the same appearance, the company can select different functions according to their different action mechanisms. Although there are various types of hydraulic valves, these hydraulic valves have basically the same points all the time.

From the structure of the hydraulic valve, High speed hydraulic cycloidal motor All hydraulic valves include oil passage plates, valve cores and their components that push the hydraulic valve cores. The key components here are torsion springs and their solenoid valves. In fact, the principle of all hydraulic valves is the same. Their opening size, pressure difference between valve inlet and outlet, and the total flow through the valve must conform to a certain proportion, and various hydraulic valves can operate their different main parameters according to the specific needs.

What regulations must the hydraulic valve meet in the specific work? The authoritative experts emphasized that the hydraulic valve must be dexterous in posture and reliable in application. In addition, the working pressure through which the oil passes should ensure less damage and better sealing performance. Tight structure is the basic rule of hydraulic valve, and the maintenance, installation, adjustment and application are also very convenient and practical.

In order to better ensure the normal operation of the hydraulic system, Bearingless cycloidal hydraulic motor In general, the company must do a good job in cleaning the interior of the hydraulic machine, so it must ensure that the hydraulic system will not be polluted by the environment before new machines and equipment are put into operation. However, it is difficult to avoid the environmental pollution inside the hydraulic valve during the whole application process, so we must pay attention to the internal cleaning of the components themselves. If there are burrs, cutting and other pollutants inside the new component, it indicates that the component has suffered from poor storage and transportation. At this moment, the fuel tank must be fully removed, and if necessary, certain effective measures must be taken to remove the pollutants, so as to prevent common safety failures caused by the operation of machinery and equipment.