Cycloid hydraulic motor It is forged from ductile iron castings with sufficient compressive strength and is suitable for places with small load and working in gaps. It is widely used in agricultural and animal husbandry, forestry and fruit industry, plastics, CNC lathes, coal industry machinery and equipment, such as mold adjustment of plastic machines, sweeping cars, sawing machines, operating platforms, etc.

Main features:

1. The main shaft bearing is equipped with angular contact ball bearing, which can bear certain axial and radial forces

2. Radial oil distribution structure is selected, which is small in size and light in weight.

3. Two products are embedded without external drain pipes.

4. Cycloidal gear set with vortex rod is selected, which has low sliding friction and high mechanical energy.

Cycloid Hydraulic motor How can the right and wrong stator and rotor pair reverse? The stator and rotor are right. It is the relative position between the rotor and the port plate is wrong. The cycloidal motor is divided into two types: shaft flow distribution and inner hole flow distribution. The method of shaft flow distribution On the main shaft bearing, you can make a mark on the bearing end cover against an oil groove and against the minimum sealing chamber of the rotor stator pair. Try it. If it is to reverse, it would be better to stagger another tooth. The method of inner hole flow distribution is the port plate. According to the connection between the port shaft and the rotor, after the motor stator pair is installed and rotated, it is OK to accurately measure the depth of the seal cavity. If the clockwise cavity of the minimum seal cavity is deeper than the cavity in the opposite direction, it is a forward rotation, and the reverse is a reverse rotation.