In addition to reasonable selection Hydraulic transmission In addition to the basic parameters and structure of system software components, the following preventive measures can be selected to control the damage of air pollution sources. Install a one-way essential oil filter on the top, bottom, left and right of the one-way throttle valve. The accuracy of the oil filter depends on the requirements of the control speed. For all components and parts to be milled and manufactured, the branch pipes shall be as tangent as possible to avoid optical fiber laser cutting seals and be beneficial to installation. All components, threading pipes, etc. shall be carefully removed after the production process to eliminate burrs, oil stains, synthetic fibers, etc; Before assembly, try to keep the geographical environment clean, and try to use dry installation method for all components. After installation, select the cleaning medium mixed with the working medium and remove it carefully. When all the funds are allocated and used normally, the new oil should be piled up before being added to the car oil tank, and can be added to the system only after being filtered. If necessary, an intermediate car oil tank should be set up to stack and filter the new oil to ensure the removal of hydraulic oil.

On the other hand, the air pollution of working medium is the air pollution of medium to external geographical environment. Should be used whenever possible BMSY cycloidal hydraulic motor Low viscosity working oil to reduce leakage; As soon as possible, the working medium of the industrial equipment transmission device of the greening project should use non element pressure oil; Green the working medium as soon as possible, and use non element pressure oil; Green additives for product research and development working media.