Hydraulic motor The mutual transformation of mechanical kinetic energy and pressure energy can be completed, but the hydraulic motor has always had the problem of excessive pressure energy consumption. If the pressure energy consumption can be reduced at a certain level, the efficiency of heat transfer will be further improved. However, how to reduce the loss of pressure energy of hydraulic motor?

To reduce the pressure energy loss when applying the hydraulic motor, it is necessary to gradually reduce the output power loss from the inside to the outside while reducing the internal pressure loss of the system software. To deal with this problem, the pressure loss of the internal flow passage of the components can be improved by adopting an integrated control loop and a forging flow passage. In addition, the loss of throttle valve of system software must be reduced or eliminated as far as possible OK Cycloidal hydraulic motor The total overflow flow that is not necessary for safety shall be prevented from using throttle system software to adjust the total flow and pressure.

In the application of raw materials, raw materials and new rubber seals manufactured by negative pressure technology can be used, so that friction losses can be reasonably reduced. The maintenance in application is indispensable. The hydraulic motor should be maintained immediately to avoid the harm of environmental pollution to the service life and stability of the motor. New pollution monitoring methods must be developed to carry out automatic measurement of environmental pollution. It should be adjusted immediately and not allowed to fall behind, so as to prevent losses caused by untimely solutions. In order to reduce pressure energy loss of hydraulic motor, the manufacturer and customers must work together to avoid pressure energy loss to a large extent.