Crusher hydraulic motor Comparison of system software with other transmission methods, Hydraulic transmission The system software has the following disadvantages:
(1) Vulnerable to leakage
Hydraulic motor Due to the high air pressure of the hydraulic transmission system software of the mechanical arm, the oil can easily leak according to the tightness or clearance. The internal leakage will reduce the volumetric efficiency, and the external leakage will lead to the consumption of chemical substances of the four column hydraulic press, in addition to environmental pollution.
(2) The viscosity of oil changes with temperature, which leads to the instability of mechanism exercise and fitness at work
The change of gear oil viscosity leads to the change of friction resistance. Therefore, the flow or leakage based on RoyalOakOffshore ShaquilleONealReplica also changes with the change of temperature, which leads to the instability of mechanism training speed in the working environment.
(3) The hydraulic motor is equipped with a steam pump, which will lead to grabbing, vibration and noise
After the steam body enters the hydraulic transmission system software, due to the large flexibility of acetylene gas, when the pressure changes from high pressure to bottom pressure or from bottom pressure to high pressure, it will lead to very large capacity changes, resulting in vibration, noise and grasping.
(4) When mineral oil is used as a chemical in a four column hydraulic press, attention should be paid to fire safety when there is a risk of ignition.
(5) Contact between mineral oil and vapor will cause oxidation, which will make the oil moldy and change the oil as soon as possible.
(6) The processing quality of construction machinery parts (graphic accuracy, surface roughness, etc.) is required to be high
It is convenient to reduce leakage and friction, so that the clearance between parts should be as small as possible. Therefore, the quality requirements for parts processing are higher, and the cost is increased.
