Hoglon Champion Oil motor It is a radial plunger type, the shell is fixed, and the hollow shaft of the hydraulic cylinder body rotates. The hydraulic cylinder body is mounted on a ball bearing in the housing. Double number of plungers are evenly distributed in the radial cylinder hole of the hydraulic cylinder body, and the port plate can accurately distribute oil to the running plunger without error. Each plunger is reflected on the camshaft roller bearing. When the hydraulic working pressure reacts on the plunger, the camshaft roller bearing transmits the force to the slope of our wheel ring, while the camshaft ring and the housing are fixed together, thus forming a torque. The camshaft roller bearing transmits the recoil force to the plunger of the hydraulic cylinder body, thus forming rotation. At the same time Hegron hydraulic motor The torque is positive with respect to the system operating pressure.

      Hoglon motor The main oil pipe connector of the system is connected to the oil holes A and C on the port body, while the oil drain pipe connector is connected to the oil holes D1, D2 or D3 on the shell. The motor can be connected with the main shaft of mechanical equipment through the hollow shaft in the hydraulic cylinder body. The torque is transmitted by means of locking disc or spline connection. The symmetrical design concept of the motor makes it possible to turn it into a double displacement motor. This means that two different speeds can be obtained under the known total flow. The displacement can be changed by installing a special valve on the oil hole flange of the connector body, Replace the original Herculen motor 。