Network optimization information:

Features of BM5 motor:

The design of stator and rotor parameters is advanced, the starting pressure is low, the efficiency is high, and the low-speed operation is stable.

High working pressure and high output torque.

Advanced shaft seal design, high back pressure bearing capacity.

The advanced and reliable linkage shaft design improves the service life of the motor.

Advanced valve train design, high valve train precision, automatic wear compensation.

In the hydraulic system, it can be used in series, Hydraulic cycloid motor stator It can also be used in parallel, and the leaking oil pipe shall be connected in series.

Tapered roller bearing design is adopted, with large radial bearing capacity, and the motor can directly drive the working mechanism.

Description:

The working pressure refers to the allowable pressure at the inlet.

The rated working pressure refers to the working pressure difference.

The motor shall not be used at the same time under speed and pressure.

The allowable duration of the operating conditions is 6 seconds.

Recommended oil: Bm5 cycloidal hydraulic motor Anti wear hydraulic oil, viscosity 37~73 centistokes, oil cleanliness ISO18/13.

The operating oil temperature is 80 ℃.

Before the motor works at full load, it must be run in at 30% rated pressure for more than 1 hour.

Reliable dynamic seal control means. The allowable back pressure of the motor can reach 7Mpa. In order to obtain good service life and comprehensive performance, it is recommended not to exceed 3.5 MPa. If the limit is exceeded, the leaking tubing needs to be connected. When connecting the leaking oil pipe, make sure that the Madane is always full of oil. The leaking oil pipe shall be throttled to keep the back pressure above 0.35 MPa Connect the leaking oil pipe.