Network optimization information:

Since there is no lateral force between the swing cylinder and the piston, the bottom of the piston is designed to be statically balanced. The torque between the piston and the crankshaft is transmitted through the rolling bearing. When transmitting the force, the friction loss is small. So AKS series Hydraulic motor It is characterized by high mechanical efficiency and large starting torque (mechanical efficiency is greater than 0.92 when starting).

The plane valve distributor has simple structure, reliable operation, good sealing and little leakage. Since plastic piston rings are used to seal the piston and swing cylinder without leakage WHITE motor Very high volumetric efficiency (up to 0.98). Because the friction loss is reduced in structure and the sealing performance is improved, the low-speed stability is good, and it can run smoothly under the working condition of 1r/min, and the speed regulation range is large (the speed regulation ratio can reach 1000).

4、 Since there is no clearance between the piston and the bearing sleeve fixed by the snap ring, this series of hydraulic motors can operate under the working condition of the pump Cycloidal hydraulic motor winch After the oil inlet is closed, the motor can run at high speed under the working condition of free wheel.

This series of hydraulic motors has very high pressure, and the pressure can reach 45MPa. Light weight, small size and high specific power.

Because of its simple structure, reasonable design and large bearing load capacity, it has reliable operation, long service life and low noise. The transmission shaft can withstand radial load and the rotation direction is reversible.